4Line SPI Interface Small TFT LCD Display 3.5 Inch Touch Panel 320x480
Product Details
| Number Of Pixel: | 320xRGBx480 |
| Screen Size: | 3.5 Inch |
| Display Area: | 48.96(H)x73.44(V) |
| Brightness (cd/㎡): | 400 |
| Interface: | 4Line SPI |
| Driver Ic: | ILI9488 |
Product Description
| Item | Specification | Unit |
| Screen Size | 3.5 inch | Diagonal |
| Number of Pixel | 320RGB(H)x480(V) | Pixels |
| Display area | 48.96(H)x73.44(V) | mm |
| Pixel pitch | 0.153(H)x0.153(V) | mm |
| Outline Dimension | 54.48x84.71x2.20 | mm |
| Pixel arrangement | RGB Vertical Stripe | -- |
| Display mode | Normally White | -- |
| Viewing Direction(eye) | 12 0'CLOCK | -- |
| Gray inversion direction | -- |
|
| Display Color | 262K | -- |
| Luminance(cd/m2) | 400 | nit |
| Contrast Ratio | 500:1 | -- |
| Surface treatment | -- | -- |
| Interface | 4Line SPI |
|
| Back-light | LED Side-light type | -- |
| Drive IC | ILI9488 |
|
| Operation Temperature | -20~70 | ℃ |
| Storage Temperature | -30~80 | ℃ |
The 3.5-inch 320x480 resolution small TFT liquid crystal display with 4-line SPI interface is a common display device.
The following is a detailed introduction to it:
Dimensions: The diagonal length is 3.5 inches. The effective size of the display area is generally approximately 48.96mm × 73.44mm.
Resolution: 320×480 pixels, which can provide relatively clear image and text display effects.
Display colors: Some products support 262K color display, while others can support 16.7M color display, meeting different display requirements.
Interface type: It adopts 4-wire SPI (Serial Peripheral Interface) interface. This interface method can save the I/O pin resources of the microcontroller and facilitate connection with various master control chips.
Display effect: Some products adopt IPS panels, which have a wide viewing angle of 170°. They can provide clear and vivid display effects at different angles without any obvious distortion or color change.
Touch performance: The resistive touch screen has high touch accuracy and can accurately recognize single-point touch operations; the capacitive touch screen supports multi-point touch and is more flexible and convenient to operate. Users can interact with the display through touch, sliding, zooming, etc.
Work stability: Some products have undergone strict testing and verification and can meet industrial or military standards. The working temperature range is generally between -20℃ and 70℃, and the storage temperature range is between -30℃ and 80℃. They can work stably for a long time in harsh environments.
Application fields: Due to its small size, simple interface and good performance, it is widely used in various embedded systems, such as intelligent instruments and meters, industrial control equipment, handheld devices, smart home control panels, etc.
FAQ:
1. I want the LCD display 8 digits and the outline size is 65x30x2.8mm………?
Answer: No problem. Firstly, please kindly send us your specification/ drawing paper
If you have not the specification, you can also provide your samples; we will recommend the suitable one
if it is standard products. Or we can customize for you based on your own requirement.
2.This LCD is just what we want, but it is big size, do you have any smaller size? And the display content need to be changed a little.
Answer: For the segment type LCD module, if you need modify the outline size or display content,
a new LCD glass module is need. We have to open new tooling for you.
3. This LCD display is HTN type, but I want STN type,can you make?
Answer: That’s all right . we can change for you as per you request.
4. I want customize a new LCD module. Can you do?
Answer: Yes, we can. Please send your drawing paper. If you have not, please advise me the outline size
of the LCD display, display information( Glass thickness, Polarizer, Display Type, Connector mode,
Storage Temp. Operating Temp. Supply Voltage, Viewing direction, drive condition), we can customize for you.
5. What is leading time for tooling?
Answer: General speaking, it will cost 15 to 25 days after drawing paper confirmation and tooling charge payment,
we can report you the exact time when you confirm the drawing paper.
6. Can you send us samples for checking?
Answer: Yes,. Samples order is available.
7. What is the Leading Time?
Answer: If we have stock for the standard ones, the leading time is one day after payment. If it is the mass production for
special ones, the leading time is about 15-30 days. suppose we can finish earlier, we will report the information in advanced.
Product Tags:
|
|
3.5 Inch 320x480 Resolution TFT LCD Display with 4Line SPI Interface and Touch Panel Images
|
